Horizon OC

Appearance

Getting Started ​

Getting started is easy, so long as you have a modded Switch with Atmosphere.

Currently supported Atmosphere version: 1.10.2 Please check that your Atmosphere version matches before proceeding.

IMPORTANT

Whenever you install HOC, we recommend doing it through Haze MTP, Hekate UMS, or any FTP server. Do not remove the SD card from the slot; frequent removal can harm the reader.

  1. Download latest dist.zip at Horizon-OC GitHub.
  2. Alternatively, we also have nightly builds available through GitHub actions. We also plan to add nightly.link support in the future. However, those builds haven't been tested and are unsupported, so use them only if you have a specific reason.
  3. Once you've downloaded it, the extracted contents are drag-n-drop. You can let it overwrite contents on the SD card if prompted.

NOTE

This may overwrite your current version of sys-clk. If you must keep your specific version, copy only atmosphere/kips/hoc.kip to the SD card in its respective folder. However, rest assured hoc-clk has many more features and is the supported version going forward.

Custom exosphere

You might have noticed on the root of the folder there's an exosphere.bin file. This allows you to perform memory timings on-the-go without a restart. This is optional and it will not affect overclocking capabilities.

To use it, copy it to: atmosphere/exosphere.bin

Configuration ​

Once the files are moved, open bootloader/hekate_ipl.ini. Find the instance you want to run Horizon OC on.

Example (do not copy and paste this exactly):

ini
[Atmosphere EmuNAND]
pkg3=atmosphere/package3
emummcforce=1
icon=bootloader/res/emu_boot.bmp

Add the following line to the bottom of your chosen profile:

ini
kip1=atmosphere/kips/hoc.kip

And if you included the exosphere patch, add this line as well:

ini
secmon=atmosphere/exosphere.bin

Safety Instance

You can also make a separate instance to boot without the KIP and exosphere patch. In case an unstable overclock config causes instability, you can boot into this "clean" instance to fix your config.

Example:

ini
[Atmosphere No-KIP EmuNAND]
pkg3=atmosphere/package3
emummcforce=1
icon=bootloader/res/emu_boot.bmp

Note the lack of kip1 and secmon. While hoc-clk, the sysmodule, and the overlay will still boot, the overclock configurations will not be applied.

Running the Overlay ​

You're ready to go! After booting, if it succeeded, you can open your overlay (likely Ultrahand) generally by pressing ZL + ZR + D-Pad Down.

Depending on your Switch model, refer to the specific configuration guide: